Myson 25-18 Manuel d'utilisateur Page 11

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 18
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 10
Grill
Grill hinge
Outer casing
Filter
Side cover
Control panel
Chassis
iVECTOR Exploded View
20
iVECTOR Technical Information iVECTOR Technical Information
21
iVECTOR Dimensions and Fixings
Model
Dimensions (mm)
iV60x080 800 503
iV60x100 1000 703
iV60x120 1200 903
iV60x140 1400 1103
iV60x160 1600 1303
Casing Size (A) Fixing Centres (B)
595
150
152.80
800/1000/1200/1400/1600
MYSON
iVECTOR Performance Data (continued)
Weight, Water Content and Motor Power
Noise Levels
l
Automatic room temperature control.
l
Fan only option for ambient air circulation.
l
Three fan speeds.
l
Unit mounted controls and display.
l
Unit control panel tamper proof lock.
Water connections (3/4" BSP) are on the left-hand side and the
system pipework may be brought in from underneath or
the rear.
iVECTOR Water Connections
All iVECTOR models require an electrical supply of 220-240V –
50Hz fused at 3A.
iVECTOR Electrical Data
iVECTOR Controls
Model
Motor
Power (w)
Water
Content (l)
Unpacked
Weight (kg)
iV60x080 32 0.66 22.8
iV60x100 35 0.92 27.7
iV60x120 44 1.19 32.5
iV60x140 53 1.45 37.5
iV60x160 65 1.72 42.6
Noise levels tested in accordance with ISO 3741.
Model
Sound Power LwA (dB)
iV60x080 31.9 44.8 55 24.8 37.7 47.9
iV60x100 34.1 42.9 55 27 35.8 47.9
iV60x120 31.1 44.7 58.8 24 40.5 51.7
iV60x140 32 42.6 61.9 24.9 35.5 54.8
iV60x160 34.1 42.1 63.4 27 35 56.3
Normal Medium Boost
Sound Pressure at 2.5m (dBA)
Normal Medium Boost
For combined heating and cooling applications, a suitable chilled
water source and associated controls must be provided and
installed, in accordance with the recommendations of the chiller
manufacturer.
Provision must be made for condensate disposal, in accordance
with any local regulations. A condensate collection tray is fitted
and a suitable drain pipe should be connected to the spigot
(15mm) at the base of the condensate tray.
Thermostatic control for cooling may be achieved by connection
of a thermostat into the mains supply to the unit.
All pipework must be wrapped with anti-condensate material
5-10mm thick.
24050 Fan Convector bro 06/12/2011 10:53 Page 21
Vue de la page 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18

Commentaires sur ces manuels

Pas de commentaire